天天曰丨黑人性猛爱xxxxx免费丨亚洲xxxx视频丨亚洲熟妇av一区丨欧美黄色大片网站丨成年动漫av网免费丨日本人乱人乱亲乱色视频观看丨www色99丨欧美极品第一页丨久草在线观看福利丨亚洲国产老鸭窝一区二区三区丨国产色av丨国产性夜夜春夜夜爽1a片丨丝袜亚洲精品中文字幕一区丨欧美狠狠操

alloy composition

EN AW-5083 (AlMg4.5Mn0.7),

Standard: DIN EN 573-3 / 3.3547 Place of Origin: Germany

Material attributes

Machining performance is very good (HSC/HPS is excellent)

Good welding performance (TIG, MIG) (using S Al 5183)

Good anodizing performance, no masking modification

Polishability is very good

Corrosion resistance is very good

EDM workability is good

Typical mechanical characteristics

Tensile strength R m 240-290 MPa (N/mm 2)

0.2% yield strength R p 0.2 110-130 MPa (N/mm 2)

Elongation at break A 5% 15

Brinell hardness HB 70

Typical physical properties

Density 2.66 g/cm 3

Thermal conductivity 110-140 W/(mK)

Conductivity 16-19 MS/m (m/Ω mm 2)

Elastic modulus ~70,000 N/mm 2

Coefficient of thermal expansion 24.2 * 10 -6 /K

Thickness and size

Supply ruler for cast aluminum standard plates and custom cut pieces with a thickness of 5 mm to 100 mm

The inch range is:

Thickness* Maximum width* Maximum length*

≥ 5 mm x 1320 mm x 3020 mm (up to 6000 mm)

≥ 5 mm x 1520 mm x 3020 mm (up to 6000 mm)

≥ 10 mm x 1570 mm x 3670 mm (up to 6000 mm)

≥ 15 mm x 2160 mm x 4000 mm (up to 6000 mm)

(The wafer, ring and special shape cut pieces can be customized as required.)

Width greater than 2160 mm: Please refer to the product information about ACP 5080 GIANT / ACP 5080R GIANT

tolerance

Surface roughness R a ≤ 0.3 μm

Thickness tolerance +/- 0.1 mm

Flatness thickness 6-12 mm ≤ 0.40 mm**

Thickness> 12-100 mm ≤ 0.13 mm**

Cast plate width tolerance 0/+10 mm

Cast plate length tolerance 0/+15 mm

Custom cut tolerance (length/width) DIN ISO 2768-m

(Stricter control can be carried out as needed)

*Other sizes can be customized on demand. The company reserves the right to change the technical content.

** Measured in a straight line per meter